Areca ARC-1213-4I Bedienungsanleitung PDF herunterladen (Seite 96)

DRIVER INSTALLATION

system installations. For Windows 7/2008/Vista, you can copy the

Windows driver le to USB device and installed from it. Determine

the correct kernel version and identify which diskette images

contain drivers for that kernel. If the driver le ends in .img, you

can also create the appropriate driver diskette using “dd” utility.

The following steps are required to create the driver diskettes:

1. The computer system BIOS must be set to boot-up from the

CDROM.

2. Insert the ARC-1882 software driver CD disc into the CD-ROM

drive.

3. The system will boot-up from CD-ROM Drive; to create the driver

diskettes, select the “SAS RAID Controller Driver Diskette Make

Utility”, and a screen with several choices will be displayed.

4. Move the highlight bar to the “Create Driver Disk” entry and

press Enter.

5. The screen queries the ARC-1882 SAS RAID controllers support

driver database and displays a list of available drivers. Move the

highlight bar to the correct driver entry and press Enter key to

select.

6. The next screen will show “Please insert a formatted diskette

into drive A:!! Press any key to continue”. Insert the formatted

diskette in drive “A” and press any key to continue.

7. The window will display the driver building message: ”Now is

writing to Cylinder…” as it copies the image le from the CDROM

to driver diskette.

8. The “Write Complete !!” message will display when the driver

diskette ready.

The driver diskette is made now. Proceed to the following

instruction for installation procedures.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 197 198

Keine Kommentare

Areca ARC-1213-4I Bedienungsanleitung Seite 96