Areca ARC-1213-4I Bedienungsanleitung PDF herunterladen (Seite 159)

159

APPENDIX

Controller with onboard LAN port, you can directly plug an Ethernet

cable to the controller LAN port, then enter the McBIOS RAID

manager to congure the network setting. After network setting

congured and saved, you can nd the current IP address in the

McBIOS RAID manager "System Information" page.

From a remote pc, you can directly open a web browser and enter

the IP address. Then enter user name and password to login and

start your management. You can nd the rmware update feature

from the "Raid system Console" on the "System Controls" option.

A-3 Upgrading Firmware Through nash DOS Utility

Areca now offers an alternative means communication for the 6Gb/s

SAS RAID controller – Upgrade the all les (BIOS, BOOT, FIRM and

MBR0) without necessary system starting up to running the ArcHttp

proxy server. The nash utility program is a DOS application, which

runs in the DOS operating system. Be sure of ensuring properly to

communicate between 6Gb/s SAS RAID controller and nash DOS

utility. Please make a bootable DOS oppy diskette or UBS devices

from other Windows operating system and boot up the system from

those bootable devices.

• Starting the nash Utility

You do not need to short any jumper cap on running nash utility.

The nash utility provides an on-line table of contents, brief

descriptions of the help sub-commands. The nash utility put on

the <CD-ROM>\Firmware directory. You can run the <nash> to

get more detailed information about the command usage.

Typical output looks as below:

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 197 198

Keine Kommentare

Areca ARC-1213-4I Bedienungsanleitung Seite 159