Areca ARC-1213-4I Bedienungsanleitung PDF herunterladen (Seite 28)

HARDWARE INSTALLATION

In an existing system:

• To install the controller driver into the existing operating system.

For the detailed installation procedure, please refer to the Chapter

4, Driver Installation.

Step 12. Install ArcHttp Proxy Server

The 6Gb/s SAS RAID controller rmware has embedded the web-

browser McRAID storage manager. ArcHttp proxy server will launch

the web-browser McRAID storage manager. It provides all of the

creation, management and monitor 6Gb/s SAS RAID controller

status. Please refer to the Chapter 5 for the detail ArcHttp Proxy

Server Installation. For SNMP agent function, please refer to Ap-

pendix C.

Step 13. Congure Volume Set

The controller congures RAID functionality through the McBIOS

RAID manager. Please refer to Chapter 3, McBIOS RAID Manager,

for the detail. The RAID controller can also be congured through

the McRAID storage manager with ArcHttp proxy server installed,

LCD module (refer to LCD manual) or through on-board LAN port.

For this option, please refer to Chapter 6, Web Browser-Based Con-

guration.

Step 14. Determining the Boot Sequences

For PC system:

• 6Gb/s SAS RAID controller is a bootable controller. If your system

already contains a bootable device with an installed operating sys-

tem, you can set up your system to boot a second operating sys-

tem from the new controller. To add a second bootable controller,

you may need to enter setup of motherboard BIOS and change the

device boot sequence so that the 6Gb/s SAS RAID controller heads

the list. If the system BIOS setup does not allow this change, your

system may be not congurable to allow the 6Gb/s SAS RAID con-

troller to act as a second boot device.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 197 198

Keine Kommentare

Areca ARC-1213-4I Bedienungsanleitung Seite 28